Fiber optic Mechancal splice will play an irreplaceable role in FTTH access, fiber optic quick connector on-site termination technology just to solve this problem, Its main internal component is a precision v-groove, after the two pigtails dialing fiber using a cold connector to achieve the two pigtails docking ;without the need for fusion splicing operation is convenient and fast, low cost of connection, truly realize anytime, anywhere access!
APPLICATION
Structural use of non-pre-embedded fiber-optic structure.
The reliability of fiber optic clamping is very good.
Good stability of connection.
Small insertion loss.
The use of good maintenance.
The installation speed is very fast.
Meet IP65 waterproof requirements.
PRODUCT PHOTOS
 |  |
Optical Fiber Mechanical Splice
|
|
PRODUCT PARAMETERS
ITEM | Technical Parameters |
Cable Scope | 2 * 3.0 mm butterfly cable ,2 * 5.0 mm butterfly cable |
Device length | About 96.5mm |
Fiber Diameter | 125μm |
Coating Diameter | 250μm |
| Fiber type | G657A1 |
| Insertion Loss | Max: 0.2dB Typical: 0.1dB（1310nm ~ 1550nm) |
| Return Loss | ≤ -45dB |
| Success Rate | >98% |
| Reusable Times | >5 times |
| Tighten Strength of Naked Fiber(Use Fortis fiber) | >3 N ; IL change ≤ 0.2dB (Test time: 2 minutes) |
| Force holds 2 x 3 mm cable type at the beginning of the fast connector | ≥40 N, loss ≤0.2 dB (Test time: 2 minutes) |
| Working temperature | -10 ~ +60 C |
| Storage Temperature | -40 ~ +85 C |
| Drop Test（4m concrete floor, once each direction, three times total) | IL change ≤ 0.3dB |
| Waterproof grade | IP65 |